Transmitter operates on 10.5V to 45V DC at transmitter terminals.

10.5V to 32V DC for the units with op-tional arrester.

Selectable from HHC(1)
If self-diagnostic detect transmitter failure, the analog signal will be driven to either "Outphut Hold", "Output Overscale" or "Output Underscale" modes.

Ambient: -40 to +85°C

(-20 to + 80°C for LCD indicator)

(-40 to +60°C for arrester option)

(-10 to +60°C for fluorinated oil filled transmitters)

For explosionproof units (flameproof or intrinsic safety), ambient temperature must be within the limits specified in each standard.

Process: -40 to +120°C for silicone fill sensor

-20 to +80°C for fluorinated oil fill sensor

Storage: -40 to +90°C

With HHC(1) (Model FXW, consult Data Sheet No. EDS8-47), following items can be remotely displayed or configured.

Note: HHC's version must be higher than 7.0 (or FXW .......1---...4), for FCX-AIII.

(Model FFP, refer to Data Sheet No. EDS6-128)

Converts process connection to 1/2-14 NPT or to Rc1/2; in carbon steel or in 316 stainless steel.

(Model FFN, refer to Data Sheet No. EDS6-128)

Available in Carbon steel or in 316 stainless steel and in pressure rating 16MPa or 42MPa.