Mô tả sản phẩm
MLG80 Magnetic Level Gauge
Model : MLG80
BRAND : KHD ENGINEERING
Operating principle
Magnetic level gauges work on the principle of communicating vessels, therefore the level in the
measuring chamber will be the same as the level in the vessel. The measuring chamber is fitted with a float, which has a magnet inside. The float with magnet will float on the medium and the magnet in the float will turn the flaps of the indicating rail.
The float in the measuring tube is standard not pressurized and has no magnetic or mechanical
guidance. This construction makes the float less dangerous than a float which is standard pressurized.
When necessary Hadro can produce a pressurized float. With the below mentioned process conditions it is possible to select a float which will float on the medium.
- Medium
- Density
- Working pressure
- Temperature
Customer benefits:
-
- Low installation, maintenance, and engineering cost
- High visibility
- Safe installation and operation
- 2 year warranty on Chamber, Float and Indication Assembly
Industries served:
-
- Oil and Gas
- Petrochemical
- Chemical
- Power Generation
- Water and wastewater treatment
- Food and Beverage
- Pharmaceutical
- Pulp and Paper
- Biotech
- Semiconductor
Specifications
|
|
Connection |
From ½” to 2” flange type, JIS, ANSI, DIN rating available; special size on request |
Pressure Limited |
20 kg/cm² for Metal chamber type (Stainless Steel) |
Temperature Limited |
-20~150°C for Metal chamber type (Stainless Steel) |
Center to Center Length |
min 200mm, maximum 5700mm |
Accuracy |
±8mm |
Indicating Case Material / Protection Class |
SS304 / IP66 |
Indicating Strips Material |
SS304 |
Indicating Float Material |
SS316 |
Specific Gravity |
600~2000 kg/m³ |
Chamber Size |
ø60mm |
ORDERING INFORMATION:
Thông số mẫu báo giá
Magnetic Level Gauge
Brand : KHD/VIETNAM
Model : MLG80-600mm
Process Temperature : -20 to 150 degree C
Pressure Limited : 10kg/cm2
Protection Class : IP 66
Indicating Strips Material: SS304
Indicating Float Material: SS316
Scale Plate : yes
Process connection type : JIS 10K
Process connetion size : 1/2"
Vent type & size : 1/2" NPT
Drain type & size : 1/2" NPT
Specific Gravity :
Accuracy : 8mm
C to C Length : 600mm
Ứng dụng khách hàng :
Môi chất đo :
Nhiệt độ:
Áp suất :
Tỉ trọng :
Hình ảnh thực tế sản phẩm
Catalog
Đại lý chính thức tại Việt Nam
CÔNG TY CỔ PHẦN KỸ THUẬT KHD
Address : 17/43 Gò Dầu Street, Tan Phu District, HCM City
Tel : (028)-3559 1229 Fax : 028-3813 4680
HOTLINE : 0908507021
Website : www.khd.com.vn ; http://domucdangtutinh.com